Commercial Lock Change & Hardware Upgrades
Business doors cycle hundreds of times a day. Residential-grade hardware fitted to them does not last a year.
Replacing hardware that has to earn its keep
The main reason commercial locks fail early is duty cycle. A house's front door might be used a dozen times a day; a café's front door does that before nine in the morning. Hardware specified for a home wears out fast under that load, which is why commercial doors use heavier cylinders, stronger latching and grade-rated components built for the traffic.
A lock change on a business door is therefore a specification job before it is an installation job. What door type, what frame, what traffic, what egress requirement, and does the door need to stay locked from outside while always releasing from inside. Getting that right is the difference between hardware that lasts and hardware you replace again next season.
Hardware commonly replaced
Mortise cylinders
Standard on aluminium storefront doors and many older commercial units.
Commercial deadbolts
Heavier throw and stronger strikes than residential equivalents.
Lever sets
Chosen for accessible operation on office and interior doors.
Exit device trim
The outside pull and cylinder that works with an existing panic bar.
Egress comes before everything
Whatever goes on an exit door, people inside must be able to get out without a key, without a code, and without a second action. That principle sits above convenience, above cost and above any request to secure a door more tightly. If something you are asking for would compromise it, we will explain why and offer an alternative that does not. Local code enforcement and your insurer will both care about this.
Information to gather before calling
- Door type: aluminium storefront, hollow metal, timber or glass
- How many doors are involved and which are exits
- Whether the doors currently carry panic hardware or closers
- Whether landlord or property management approval is required
- Preferred keying arrangement across the doors
Why plan the change with us
- Hardware matched to the door type and traffic rather than to a price point
- Egress requirements respected on every exit door
- Multiple doors keyed to a coherent scheme where hardware allows
- Serving Miami-Dade, Broward and Palm Beach counties
Where we provide this service
NS Locksmith is a mobile service covering Miami-Dade County, Broward County, Palm Beach County. If you are inside those counties, call and give dispatch your exact location so the nearest technician can be routed to you.
Commercial Lock Change — Questions We Get Asked
Hardware failing faster than it should?
Describe the doors and the traffic they take and we will scope a proper replacement.
Back to Commercial Locksmith